|
Technical characteristics£º
1. High Speed
2. Easy to adjust & operate
3. Movable pocket spring buffer/Quickly & expediently to feed pocket springs
4. Produces 2.5-3 rows per minute.
5. Glues the non-woven up and down/set which rows glued up and down.
6. Cross conglutination (offset) or side-by-side conglutination (parallel) optionally.
7. Continuous or interrupted glue-extruding mode according to requirement ,save up to 30% hot melt cost when interrupted gluing mode selected.
8. Famous glue-application system (Nordson or Robatech)/Electronic components are CE-conform and Off the shelf (such as: Mitsubishi, SMC, CKD, Schneider¡)
9. Pocket spring buffer with movable plates inside to make the distance among the springs equably. |
Technical Specification:
| Spring Type |
Pocket |
| Production Speed |
3-3.5 Rows/Minute |
| Spring Diameter |
¦µ35-80mm |
| Spring Height |
¦µ80-¦µ200mm |
| Spring Coils |
4-8 Coils |
| Fabric width |
300-2100mm |
| Fabric Material |
50-150G/M2 |
| Lubrication |
Fully Automatic Standard |
| Control |
PLC |
| Power Supply |
3¦µ 380V/220V 50/60HZ 4.5KVA Input Fuse 50A |
| Air Consumption |
Approx.20M3/H 0.8Mpa |
| Operative Temperature |
0oC- +45oC |
| Machine weight |
1350KG |
|
| |
|